Get your company information seen while leading potential clients away from the competitor.
Trade show blimps are an entertaining way to keep the crowd interested and your sales team having fun at the booth.
The 7.5 ft (2.3m) Indoor R/C Blimp is best suited for trade show
halls, small convention centers and shopping malls. We manufacture
a smaller 5½ft. to fly in small areas like within the borders of your
trade show booth.
- ready to fly
- completely assembled gondola (receiver, servo and geared 6" propellers)
- 6 panel 2 mil polyurethane "vinyl" white blimp envelope
(gondola, tail fin and banner attachment points)
- 4 channel FM radio transmitter with rechargeable NiCad battery
- 2 rechargeable 4.8v 700ma NiCad gondola batteries
- spare 9.6v 700ma NiCad transmitter battery
- NiCad battery fast peak detection charger (specify 110v or 230v)
- 4 tail fins with adjustable lines & power pod for turning
- tie down lines, ballast bags, repair kit, inflation hose
- instruction booklet (includes assembly, troubleshooting, flying suggestions and info on how to care for your blimp)
**The blimps are shipped ready to fly – just attach the tail fins and gondola and away you go.**
 |
-Flying time is approximately 30-40 minutes per battery.
-Two batteries are included so one battery can charge while the other one is in use. We recommend purchasing additional gondola batteries for full day trade show.
-This blimp is powered by two 6 inch geared propellers and uses two gears and a servo to rotate the engine shaft, allowing almost 180 degrees of rotation, 90 degrees to full down, 90 degrees to full up.
-Small punctures in the blimp envelope stay small and can be fixed immediately with the repair patch supplied. A larger 8 ft blimp envelope is also available for higher elevations. |
 |
 |
OPTIONAL DROP MECHANISM
The optional drop mechanism can drop up to 20 paper coupons and baseball caps and t-shirts on the larger Arena Blimps.
|
OPTIONAL STORAGE CASE
It's worthwhile to consider a good storage case to protect your blimp investment. We can custom fit your entire blimp (envelope, gondola, tail fins, transmitter, battery charger etc.) into a foam padded Pelican Case. These tough cases are watertight, airtight, dust proof and crushproof.
|
|
